CONCLUSION
+ MAJOR
ALL COSMETIC
MINOR
MINOR
RESULT · PASSED
IN STOCK · DELTA BC + ANJOU QC
HAJEX Smith Machine Z Series - Model Z1
- Low stock - 6 items left 6 in Montréal Pickup usually ready in 24 hours Montréal, QC · 10051 Rue Mirabeau, H1J 1T7
Plate loaded
Takes 2″ Olympic
plates. 50 mm.Bar sleeves, pulley horns and storage horns are all 50 mm — the same size that fits a 7 ft Olympic bar. If the hole in your plate measures 2 inches across, it fits the Z1.
Using 1″ standard plates?
They won't fit without a sleeve adapter. Measure the hole in your plate before ordering — you need 2 inches / 50 mm.
Recommended working loads
Built for home and small-studio training. These are the loads we stand behind.
| 250 lb | On the Smith bar | Squats, presses, shrugs, calf raises |
| 250 lb | On the pull-up bar | Bodyweight plus a weighted belt |
| 100 lb | Per loading horn | Lat pulldown and low pulley |
Training heavier than this? The X-series machines carry more.
Four 50 mm horns, two jobs
-
2 working horns
Load these to set resistance on the lat pulldown and low pulley. Add a plate, add weight. Nothing to select, nothing to cap you. -
2 storage horns
Keep the rest of your plates off the floor and an arm's reach from the bar.
Every attachment is in the box
On most machines these are a second order and another few hundred dollars.
- Multi-grip pull-up bar — angled and neutral grips
- Straight lat pulldown bar — rubber grips, swivel bracket
- EZ curl bar — cambered, easy on the wrists
- 2 × J-hooks — protective sleeves keep your bar knurling sharp
- 4 × foam rollers
- Complete hardware pack — every bolt, nut and washer, plus 2 wrenches and 2 hex keys. You won't need your own tools.
Plates and a barbell are not included.
The Z1 is the frame. If you'd rather the weights arrived with the machine, the X2–X5 ship with plates or stacks.
About the product images
Some images on this page are 3D renderings, used to show layout and scale. The specifications table and the included-attachments list above are the definitive description of what ships. If a component appears in a rendering but is not named in those lists, it is not part of the machine. Want to see the actual unit before you order? Book a live video walkthrough on WhatsApp at +1 855-396-9333.
Built to train hard
-
Linear ball bearings
Not plastic bushings. A silent, friction-free bar path that feels like free weights with the stability of a machine. -
Train to failure alone
The Limit Device sets bottom stops to your exact range of motion, backed by 9 lockout positions. No spotter needed. -
A full gym in one frame
Lat pulldown and pull-up bar up top, low pulley for rows and curls, squats and lunges inside the cage.
Specifications
| Plate compatibility | 2 inch / 50 mm Olympic |
| Loading | Plate loaded — no weight stack |
| Smith bar weight | Approx. 30 lb |
| Recommended load, bar | 250 lb |
| Recommended load, pull-up bar | 250 lb |
| Recommended load, per horn | 100 lb |
| Plate horns | 4 × 50 mm (2 working, 2 storage) |
| Bearings | Linear ball bearings |
| Lockout positions | 9 |
| Safety stops | Adjustable Limit Device |
| Assembled height | 84.5 in (214.6 cm) |
| Width with bar | 72 in (182.9 cm) |
| Base footprint | 47.1 × 47 in |
| Internal cage width | 40 in |
| Anchoring | Not required — freestanding |
| Shipping weight | 234 lb (106 kg) |
| Finish | Black and red powder coat |
| Assembly | One person, no special tools |
| Delivery | 4 numbered boxes, none over 63 lb |
| Warranty | 12 months |
Complete the setup
A Smith machine without plates is a frame. Everything below is 2″ Olympic and fits the Z1.
- Olympic rubber plates
Quiet, floor-friendly, best all-round - Cast iron plates
Most weight for the money - 7 ft Olympic barbell
Free-weight work inside the cage - Adjustable bench
Needed for flat and incline pressing
Questions people ask
Will my plates fit?
If the hole measures 2 inches / 50 mm, yes — that's standard Olympic sizing, and it applies to the bar sleeves, the loading horns and the storage horns. Older 1″ standard plates need a sleeve adapter.
How much weight can it take?
We recommend up to 250 lb on the Smith bar, 250 lb on the pull-up bar, and 100 lb per loading horn. The Z1 is built for home and small-studio training. If you're pressing beyond that, look at our X-series.
What does the bar itself weigh?
Approximately 30 lb. On any Smith machine the counterbalance means the bar feels lighter than a free barbell, so your loaded number won't match your free-weight number.
Does it have to be bolted to the floor?
No. The Z1 is freestanding on its 47 × 47 in base and needs no floor anchors, so nothing gets drilled into a finished basement floor, a garage slab or a rented unit. Load the two storage horns and the base sits heavier still. Many commercial racks and functional trainers must be anchored before use — the Z1 does not.
Does the machine look exactly like the photos?
The photos show the Z1 accurately in size, layout and finish, and several of them are 3D renderings. Treat the specifications table and the included-attachments list as the definitive description of what ships — if a part appears in a rendering but is not named in those lists, it is not on the machine. If you want to check a specific detail, we will walk you through the actual unit on a WhatsApp video call at +1 855-396-9333 before you order.
Can I bench press in it?
Yes, with an adjustable bench (sold separately). The J-hooks and 9 lockout positions cover flat, incline and decline setups.
Do I need a spotter?
No. Set the Limit Device stops at your bottom position and the bar can't travel past it, so you can take a set to failure on your own.
Is assembly difficult?
No. One person can put the Z1 together — it isn't a complicated build, and every tool you need is in the box. A second pair of hands makes it quicker, mostly for lifting the top section into place.
Does it come with weights?
No — the Z1 is the frame. If you want a machine that arrives with plates or a stack included, look at the X2–X5.
Shipping, pickup and delivery, explained on one page →
Shipping — calculated at checkout from your order weight
and delivery region, for both Canada and the US. No percentage of order value.
Van delivery — our own van from Anjou: $50 in Montréal, Laval and the South Shore,
$100 to $249 further out, as far as Québec City, Ottawa and Gatineau. In the Greater Toronto
area, our Toronto driver delivers for $50 to $150 within 10 business days (order minimums apply).
Shown at checkout next to the carrier rate if your address qualifies; local delivery around
Delta too. Free pickup at both warehouses by appointment.
US customers — we ship DDP. Import duties, customs and
brokerage are prepaid by HAJEX and included in the shipping shown at checkout.
Nothing more to pay on delivery.
Heavy orders — over 10,000 lb, you get a freight quote instead
and no shipping is charged at checkout. We'll find the best rate, or you can
use your own carrier.
Transit — Canada 1–7 business days depending on province.
US 4–11 business days depending on region. Add 1–2 business days handling.
Returns — 30 days from receipt. Change-of-mind returns and cancellations are issued as store credit, minus a restocking fee of up to 35% and the non-refundable card processing fee (about 3% for Canadian cards, 5.1% for US cards). Orders not picked up are charged a $3/day storage fee after the first 2 business days. If we ever need to revise your shipping or duty cost, you can cancel for a full refund with no fees.
Full terms: Shipping Policy
· Return Policy
· TOS
support@hajex.com · toll-free 855-396-9333
hajex-smith-z1-106kg
