{"product_id":"hajex-smith-machine-z-series","title":"HAJEX Smith Machine Z Series - Model Z1","description":"\u003cblockquote\u003e\n\u003cp\u003e\u003cstrong\u003ePlate loaded\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTakes 2″ Olympic\u003cbr\u003eplates. 50 mm.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBar sleeves, pulley horns and storage horns are all 50 mm — the same size that fits a 7 ft Olympic bar. If the hole in your plate measures 2 inches across, it fits the Z1.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\u003cblockquote\u003e\n\u003cp\u003e\u003cstrong\u003eUsing 1″ standard plates?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThey won't fit without a sleeve adapter. Measure the hole in your plate before ordering — you need 2 inches \/ 50 mm.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\u003ch2\u003eRecommended working loads\u003c\/h2\u003e\n\u003cp\u003eBuilt for home and small-studio training. These are the loads we stand behind.\u003c\/p\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e250 lb\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eOn the Smith bar\u003c\/td\u003e\n\u003ctd\u003eSquats, presses, shrugs, calf raises\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e250 lb\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eOn the pull-up bar\u003c\/td\u003e\n\u003ctd\u003eBodyweight plus a weighted belt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e100 lb\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePer loading horn\u003c\/td\u003e\n\u003ctd\u003eLat pulldown and low pulley\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eTraining heavier than this? The \u003ca href=\"https:\/\/hajex.com\/collections\/smith-machine\"\u003eX-series machines\u003c\/a\u003e carry more.\u003c\/p\u003e\n\u003ch2\u003eFour 50 mm horns, two jobs\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2 working horns\u003c\/strong\u003e\u003cbr\u003eLoad these to set resistance on the lat pulldown and low pulley. Add a plate, add weight. Nothing to select, nothing to cap you.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2 storage horns\u003c\/strong\u003e\u003cbr\u003eKeep the rest of your plates off the floor and an arm's reach from the bar.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eEvery attachment is in the box\u003c\/h2\u003e\n\u003cp\u003eOn most machines these are a second order and another few hundred dollars.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-grip pull-up bar\u003c\/strong\u003e — angled and neutral grips\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStraight lat pulldown bar\u003c\/strong\u003e — rubber grips, swivel bracket\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEZ curl bar\u003c\/strong\u003e — cambered, easy on the wrists\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2 × J-hooks\u003c\/strong\u003e — protective sleeves keep your bar knurling sharp\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e4 × foam rollers\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComplete hardware pack\u003c\/strong\u003e — every bolt, nut and washer, plus 2 wrenches and 2 hex keys. You won't need your own tools.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cblockquote\u003e\n\u003cp\u003e\u003cstrong\u003ePlates and a barbell are not included.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Z1 is the frame. If you'd rather the weights arrived with the machine, the \u003ca href=\"https:\/\/hajex.com\/collections\/smith-machine\"\u003eX2–X5\u003c\/a\u003e ship with plates or stacks.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\u003cblockquote\u003e\n\u003cp\u003e\u003cstrong\u003eAbout the product images\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSome images on this page are 3D renderings, used to show layout and scale. The specifications table and the included-attachments list above are the definitive description of what ships. If a component appears in a rendering but is not named in those lists, it is not part of the machine. Want to see the actual unit before you order? Book a live video walkthrough on WhatsApp at \u003ca href=\"https:\/\/wa.me\/18553969333\"\u003e+1 855-396-9333\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\u003ch2\u003eBuilt to train hard\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLinear ball bearings\u003c\/strong\u003e\u003cbr\u003eNot plastic bushings. A silent, friction-free bar path that feels like free weights with the stability of a machine.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrain to failure alone\u003c\/strong\u003e\u003cbr\u003eThe Limit Device sets bottom stops to your exact range of motion, backed by 9 lockout positions. No spotter needed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eA full gym in one frame\u003c\/strong\u003e\u003cbr\u003eLat pulldown and pull-up bar up top, low pulley for rows and curls, squats and lunges inside the cage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePlate compatibility\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2 inch \/ 50 mm Olympic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eLoading\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePlate loaded — no weight stack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSmith bar weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eApprox. 30 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eRecommended load, bar\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e250 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eRecommended load, pull-up bar\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e250 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eRecommended load, per horn\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e100 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePlate horns\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4 × 50 mm (2 working, 2 storage)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBearings\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eLinear ball bearings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eLockout positions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSafety stops\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAdjustable Limit Device\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAssembled height\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e84.5 in (214.6 cm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWidth with bar\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e72 in (182.9 cm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBase footprint\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e47.1 × 47 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInternal cage width\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e40 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAnchoring\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNot required — freestanding\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eShipping weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e234 lb (106 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFinish\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBlack and red powder coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAssembly\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eOne person, no special tools\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDelivery\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4 numbered boxes, none over 63 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWarranty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e12 months\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eComplete the setup\u003c\/h2\u003e\n\u003cp\u003eA Smith machine without plates is a frame. Everything below is 2″ Olympic and fits the Z1.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/hajex.com\/collections\/olympic-rubber-weight-plates\"\u003e\u003cstrong\u003eOlympic rubber plates\u003c\/strong\u003e\u003cbr\u003eQuiet, floor-friendly, best all-round\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/hajex.com\/collections\/cast-iron-olympic-plates\"\u003e\u003cstrong\u003eCast iron plates\u003c\/strong\u003e\u003cbr\u003eMost weight for the money\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/hajex.com\/products\/hajex-barbell-bars?variant=43541418016956\"\u003e\u003cstrong\u003e7 ft Olympic barbell\u003c\/strong\u003e\u003cbr\u003eFree-weight work inside the cage\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/hajex.com\/collections\/benches\"\u003e\u003cstrong\u003eAdjustable bench\u003c\/strong\u003e\u003cbr\u003eNeeded for flat and incline pressing\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eQuestions people ask\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWill my plates fit?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIf the hole measures 2 inches \/ 50 mm, yes — that's standard Olympic sizing, and it applies to the bar sleeves, the loading horns and the storage horns. Older 1″ standard plates need a sleeve adapter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much weight can it take?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe recommend up to 250 lb on the Smith bar, 250 lb on the pull-up bar, and 100 lb per loading horn. The Z1 is built for home and small-studio training. If you're pressing beyond that, look at our X-series.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does the bar itself weigh?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eApproximately 30 lb. On any Smith machine the counterbalance means the bar feels lighter than a free barbell, so your loaded number won't match your free-weight number.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it have to be bolted to the floor?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The Z1 is freestanding on its 47 × 47 in base and needs no floor anchors, so nothing gets drilled into a finished basement floor, a garage slab or a rented unit. Load the two storage horns and the base sits heavier still. Many commercial racks and functional trainers must be anchored before use — the Z1 does not.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the machine look exactly like the photos?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe photos show the Z1 accurately in size, layout and finish, and several of them are 3D renderings. Treat the specifications table and the included-attachments list as the definitive description of what ships — if a part appears in a rendering but is not named in those lists, it is not on the machine. If you want to check a specific detail, we will walk you through the actual unit on a WhatsApp video call at +1 855-396-9333 before you order.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I bench press in it?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, with an adjustable bench (sold separately). The J-hooks and 9 lockout positions cover flat, incline and decline setups.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need a spotter?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. Set the Limit Device stops at your bottom position and the bar can't travel past it, so you can take a set to failure on your own.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs assembly difficult?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. One person can put the Z1 together — it isn't a complicated build, and every tool you need is in the box. A second pair of hands makes it quicker, mostly for lifting the top section into place.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it come with weights?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo — the Z1 is the frame. If you want a machine that arrives with plates or a stack included, look at the \u003ca href=\"https:\/\/hajex.com\/collections\/smith-machine\"\u003eX2–X5\u003c\/a\u003e.\u003c\/p\u003e\n","brand":"HAJEX","offers":[{"title":"Default Title","offer_id":45711281422524,"sku":"hajex-smith-z1-106kg","price":789.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0647\/5291\/0524\/files\/smith_machine_z1-100.jpg?v=1789328614","url":"https:\/\/hajex.com\/en-us\/products\/hajex-smith-machine-z-series","provider":"HAJEX","version":"1.0","type":"link"}